Knoweasy Automatic Wire Stripper and Cutter,Heavy Duty Wire Stripping Tool 2 in 1 for Wire Stripping,Cutting 5-20mm/(0.25-0.75inch)

• ✅ [Notice:] 'Do not use to cut the steel material!
• ✅ [Stripping Size Range:] 'Works with single-conductor 7 to 32 AWG( 0.03mm²-10mm² )stranded or solid wire, the wire tool is great for stripping speaker wire; Fix strip length according to requirements, stripping length range is 5-20mm/ (0.25-0.75inch), working on many wire types.
• ✅ [Product Feature:] 'Made of steel strips and glass fiber nylon; Suitable for stripping wire; Cutting off copper, cable, and aluminum wire.
• ✅ [Improved Design:] 'It has self-adjusting jaws to strip wire and no need to manually readjust this stripping pliers. It works with fine, thick single, multi-stranded conductors, PVC, and other insulation types.
• ✅ [After Sales Warranty:] 'Your customer satisfaction and 12 months warranty of wire stripper can be guaranteed.

Feature:

• For stripping the plastic or rubber insulation of the single multiple cables and wires of 0.03-10mm.
• Stripping diameter can be adjusted automatically for different wire cross section
• With easy changeable blade ,plastic jaws and adjustable length stop
• Shock-resistant glass fiber and plastic body
• No damaging of the conductor core ,long lifetime!

Package included:

• 1x Automatic Wire Stripper

Notice:

 

• The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
• Please allow slight deviation for the measurement data.
• Please allow 1-3 cm error
• Please do not use to cut the steel material.
• Do not put your fingers between the two handles when stripping or cutting wires!

• Wire cutter for multiple standed wire cables up to 10mm²

• Steel clamping jaws avoid skidding of the cable

• Precise stripping from 0.03 to 10mm² without readjustment

Stripping

Step 1:

• Stripping length adjustment:Pinch the positioning card with two fingers,corresponding to the scale below the front and back to move to appropriate location.

Step 2:

• Place the wire into the jaws and tip up to the location card.

Step 3:

• Stripping can be done with a single application of light pressure.

Step 4:

• Release the handle and take out the lead.

Trimming

Step 1:

 

• Place the wire in the cutting line,Wire inward as far as possible.

 

Step 2:

 

• The small handle can be used to cut the thread.

 

Product information

Technical Details